Connect SERIES
IMXRT Module is a M.2 2230 format board based in an IMXRT 1052 processor with a Plug and Trust device to provide a root of trust at IC level. Multiple interfaces such as LCD, USB, CSI, SD and RMII make this module suitable for different applications.
This module adds wireless communications based on LTE-M/Nb-IoT/GNSS protocols.
IMXRT Module is a M.2 2230 format board based in an IMXRT 1052 processor with a Plug and Trust device to provide a root of trust at IC level. Multiple interfaces such as LCD, USB, CSI, SD and RMII make this module suitable for different applications.
This module adds wireless communications based on Wifi protocol.
This module adds wireless communications based on LTE-M/Nb-IoT/GNSS protocols.
Overview
Module features
- IMXRT 1052 processor, based on Arm Cortex-M7 MPCore Platform.
- Different options for RAM/FLASH
- EdgeLock SE050 secure element for secure communicatios.
- M.2 Interface, 2230 Form Factor with expansion connector
- Standard interfaces sucha as GPIO, Ethernet (RMII/MDIO), I2C, SPI, UART
- Camera input via MIPI
- Display output via parallel LCD
- BG77 LTE-M/Nb-IoT/GNSS modem
- Supports both active and passive antennas
Processor features
- IMXRT 1052 processor, based on Arm Cortex-M7 MPCore Platform.
- 3020 CoreMark/1284 DMIPS @ 600 MHz
- Up to 512 kB Tightly Coupled Memory (TCM)
- FreeRTOS and Azure OS support available with MCUXpresso SDK
- Real-time, low-latency response as low as 20 ns
- Industry’s lowest dynamic power with an integrated DC-DC converter
- Low-power run modes at 24 MHz
- Advanced multimedia for GUI and enhanced HMI
- 2D graphics acceleration engine
- Parallel camera sensor interface
- LCD display controller (up to WXGA 1366×768)
- 3x I2S for high-performance, multichannel audio
- Extensive external memory interface options
- NAND, eMMC, QuadSPI NOR Flash, and Parallel NOR Flash (not all available on the module)
| Type | Qty | Input/Output |
|---|---|---|
| GPIO | 9 | I/O |
| ADC | 2 | I |
| UART | 1 (only one UART available in BG77 modem module) | I/O |
| I2C | 1 | I/O |
| CAN | 2 | I/O |
| USB | 2 | I/O |
| LCD | 1 | I/O |
| SD | 1 | I/O |
| CSI | 1 | I/O |
| RMII/MDIO | 1 | I/O |
Peripherals and Gpios
SDK software makes the pin configuration described in the table. Other configurations are possible just changing processor pin muxing.
| Code | Description |
|---|---|
| BAB0001 | M.2 Connect module Processor i.MX RT 1052 Modem BG77-GNSS 0MB RAM 0MB Flash No security chip |
| BAB0301 | M.2 Connect module Processor i.MX RT 1052 Modem BG77-GNSS 0MB RAM 4MB Flash No security chip |
| BAB3401 | M.2 Connect module Processor i.MX RT 1052 Modem BG77-GNSS 8MB RAM 8MB Flash No security chip |
| BAB4501 | M.2 Connect module Processor i.MX RT 1052 Modem BG77-GNSS 16MB RAM 16MB Flash No security chip |
| BAB0011 | M.2 Connect module Processor i.MX RT 1052 Modem BG77-GNSS 0MB RAM 0MB Flash Security chip installed |
| BAB0311 | M.2 Connect module Processor i.MX RT 1052 Modem BG77-GNSS 0MB RAM 4MB Flash Security chip installed |
| BAB3411 | M.2 Connect module Processor i.MX RT 1052 Modem BG77-GNSS 8MB RAM 8MB Flash Security chip installed |
| BAB4511 | M.2 Connect module Processor i.MX RT 1052 Modem BG77-GNSS 16MB RAM 16MB Flash Security chip installed |
Ordering
The standard part number are shown in this table. Other configurations are available under demand.